DECOVAL SERVIPACK
DECOVAL is the specialist in waste treatment equipment. We are involved in the design, manufacture
Can we grind wood if there are bits of wire with it? As a winegrower I have to crush vines after uprooting. Do you recommend a machine specifically?
hello, the preferred wood chipper technology when there are iron wires is the 4-axis shredder with a calibration grid. wood chips and iron wire coming out of the grinder can be de-ironed with a magnetic drum mat
I have waste larger than 150mm and I would like to reduce its size. A hammer mill will be inefficient for the rocks and a crusher requires to separate the waste). What solutions do you recommend for shredding this mixed waste?
Hello, your request being out of our manufacturing standard, we must check with our design office. Sincerely Emmanuel BRACAVAL
What amortization period do you expect for a large industrial green waste shredder?
hello, we don't have green waste grinders in our range
Cordially
I am looking for recommendations for a shredder with a minimum capacity of 1 ton/hour. What parameters to take into account?
Hello,
Regarding your question, there are several parameters that you can take into account:
> The typology of your waste: the products do not all have the same density and from one material to another, the hourly capacities may vary.
> The size of your waste: this allows you to define the size of the cutting chamber according to the product and its size.
> The size of shredded products at the outlet: some shredders can calibrate the products at the outlet using a calibration grid, depending on the required result.
> The shredding objective: destruction, volume reduction for transport optimization, other objectives ....
> The type of crusher feed: by conveyor, manually, by tipper, by grapple...
Do not hesitate to come back to us for any costing request
DECOVAL SERVIPACK
03.20.77.62.49
