Valentini RA 500-700 slicer

Valentini RA700 meat slicer

The Valentini RA700 excavator can work in the ground up to 70 cm deep, it is available in two working widths 450 and 550 mm. You need a 230 to 300 hp tractor to drive it. Its rotor rotates at 190 rpm and it weighs 5400 or 5600 kg depending on the version.

Standard equipment of the Valentini RA700 excavator

• Universal 3-point hitch (3rd category)
• 1000 rpm single-speed gearbox with freewheel
• Reinforced rotor diameter 1100 mm with picks
• Rotor with 35 mm diameter peaks in "HIGH RESISTANCE and ANTI-WEAR STEEL"
• Protection rings on the transmission bearings
• Central cardan with safety bolt (fork side tractor 1? 3/4 Z20)
• Single side transmission with gears in oil bath “by Valentini 6G” (It is a side transmission with 6 gears which, compared to the 4G transmission, also serves as a super reducer, supporting the central transmission of the machine, reducing the internal heat of the central transmission and the absorption of power from the tractor. This "HEAVY DUTY" system, superior to traditional chain or belt transmissions, is suitable for heavy and deep work)
• Bearing bearings with special seals “Labyrinth Bearing Protection by Valentini” (The lower supports of the transmission and the neutral have been designed to last longer, thanks to a system of labyrinth notches which trap dirt outside and prevents material that becomes entangled around the brackets from damaging the internal system)
• Protective cover in "HIGH RESISTANCE and ANTI-WEAR STEEL"
• CE safety protection
• Protective front flaps
• Intrusion protection for transport
• Parking feet

Tractor equipment for the Valentini RA700 excavator

• Vario transmission or super reducer
• Hydraulic distributors required from 2 to 4

Weight :
RA-C 500×500 6100 kg
RA-C 550 x 600 5450 kg
RA-C 700x400 5400kg
RA-C 700 x 500 5600 kg
RA-C 700 x 700 7000 kg