EC 860 Europe Chippers Cutting Mill

EC 860 Europe Chippers Cutting Mill

The EC 860 Europe Chippers cutting mill is known for its compact and ergonomic design, its energy efficiency and its ease of transport but also and more particularly for its working capacity up to more than 70 m3/h with just 150 HP.

This shredder is designed to shred trunks and logs up to 50 cm in diameter, branches and prunings, sawmill waste, bark, fagots, etc.

Technical characteristics :

• Heavy-duty self-supporting steel frame construction
• Lower feed drum Ø 500 mm width 710 mm equipped with very aggressive hooks
• Upper introduction roller Ø 300 mm Width 710 mm fitted with very aggressive hooks for optimal regularity of introduction
• Drive of all the introduction rollers by hydraulic drum motors
• Feed opening: width 800 mm maximum height 600 mm
• Fixed infeed table made of sheet steel

shredding unit

• Heavy rotor Ø 1000 mm width 800 mm, equipped with 2 easily replaceable blades
• Knives can be resharpened several times
• Replaceable counter-blade that can be used 4 times in 90° rotations
• Rotation speed of 1000 – 1200 min-1
• Easily interchangeable calibration grid to adjust the outgoing particle size, standard mesh from 50 to 70 mm
• Open grid available
• Transmission by high performance trapezoidal belts on the rotor

General characteristics: Exhaust blower

• Exhaust blower immediately removes chips as you grind
• Rotor shaft drive
• Angled nozzle 360° rotatable by cylinder
• Visor tiltable by cylinder
• The angled nozzle can be folded easily for passage in transport position
• 3.0m exit height for easy loading into a trailer

Electrical control box

• Electrical control box
• Ergonomic dashboard grouping together all the controls and indicator lights of the machine
• Electrical control cabinet integrated into the machine
• "No-stress" regulation system blocking the introduction whenever the rotor speed drops below a preset threshold. This system also makes it possible to obtain a
  very precise cutting insert, with a minimum of fines
• Emergency stops by punch on both sides of the machine

Others

• Infeed table foldable by 180° cylinders, with triple row of open chains allowing the evacuation of harmful stones and sand
• On-board crane hydraulically driven by the crusher engine
• Infeed table foldable by 180° cylinders

Dimensions and weight

• Machine built in high carbon steel Type S355
• Weight 6500 Kg approximately in running order
• Dimensions in transport 5680 x 2290 x H= 3125 mm
• Reinforced protection with two coats of anti-rust primer and one coat of lacquer finish
• Colors RAL1007 (yellow) for the machine, RAL 7021 (dark grey) for the frame and decorative strips

Diesel motor

150 hp CAT C4.4 Tier IV Final engine.
• 600 L fuel tank allowing a very good autonomy
• Drive by double train of belts offering a
jerk-free transmission with virtually no loss of power
• Progressive clutch by automatic tensioning of the belts during the starting cycle

Mobility

• Road trailer 90 km/h double axles
• Agricultural trailer 40 km/h or 25 km/h
• Hydraulic stand with separate control by jacks at the drawbar
• Coupling ring ø 50mm instead of 38mm

Accessories and options

• Calibration grids of 50, 70, or 90 mm
• Interchangeable double grid ensuring maximum exit surface. Meshes of openings 50, 70, or 90 mm
• Spare counter blade
• Spare blade
• Infeed table foldable by 180° cylinders
• Two side feed drums
• Remote
• Electro-hydraulic control, operated by Joystick for variable load pump
• Manual control block with 2 levers + seat
• 60 L/min gear pump + coupling
• Load variation pump 140 L/min + coupling
• Oil cooler in conjunction with gear pump
• Normal cabin including CD radio, ventilation, wiper, and seat
• LUXURY cabin including CD radio, air conditioning, heating, windscreen wiper, seat, chipper control display, 1200 mm cabin lift system, 3 working lights, 2 pedals + 2 joysticks